Canon RP10 for CR-120/150 CR-120/150 User Guide - Page 62
before using the CR-150/CR-120. See Cleaning the Ink
![]() |
View all Canon RP10 for CR-120/150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Condition Cause and Remedy Condition Cause and Remedy Condition Cause and Remedy Other Causes Condition Cause and Remedy Other Causes Card Jam. • Open the Left Maintenance Cover to remove the card. • Press and hold the Start button, then jammed card will be ejected. A double feed error often occurs. A double feed error may occur when documents with different thicknesses are mixed. Adjust the Separation Roller gap. (See "Adjusting the Separation Roller Gap," on p. 80.) MICR characters are not recognized correctly. • The scanner cannot correctly read MICR characters if the magnetic head is dirty. Clean the MICR magnetic head. (See "Cleaning the Magnetic Head," on p. 69.) • If MICR characters cannot be recognized correctly after cleaning the head, the MICR head may be worn. Contact your local authorized Canon dealer or service representative to have the scanner serviced. • The MICR text is on the back of the document. Load the side with the MICR characters facing right in the document tray. • Some of the MICR characters are scratched or missing. Splattered MICR ink or toner may also be the problem. The imprinter is not printing correctly (missing imprint dots). Ink is clogged in the ink jet nozzle. Clean the ink jet nozzle. Cleaning the ink jet nozzle is recommended before using the CR-150/CR-120. (See "Cleaning the Ink Jet Nozzles," on p. 70.) The ink cartridge may be empty. Condition Cause and Remedy Condition Cause and Remedy Documents get dirty when using the imprinter. Ink from the imprinter has been placed on the feed path. Clean the ink off the feed path. (See "Cleaning the Ink Jet Nozzles," on p. 70 and "Cleaning the Feed Path," on p. 64.) Scanning speed had reduced suddenly. Processing may be slowed when scanning in the long period of time and continuously to avoid overheat inside the scanner. Wait a while before scanning again. 62
![](/manual_guide/products/canon-rp10-cr120150-cr120150-user-guide-efe0626/62.png)