Canon SD790IS PowerShot SD790 IS / DIGITAL IXUS 90 IS Camera User Guide - Page 82
Select a shooting mode., Shoot.
UPC - 012345332609
View all Canon SD790IS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
80 1 Select a shooting mode. 1. Set the mode switch to . 2. Turn the control dial to select a shooting mode. • See Changing Colors (p. 105) for the procedures for using and . 2 Shoot. • Pressing the shutter button halfway automatically sets the exposure, focus and white balance settings. • Pressing the shutter button fully starts recording video and sound simultaneously. • During shooting, the recording time and [zRec.] appear on the LCD monitor. • Pressing the shutter button fully again stops recording. Recording will stop automatically under the following circumstances. - When the maximum recording time or maximum recording capacity is exceeded. - When the built-in memory or memory card becomes full. z You are recommended to use a memory card that has been formatted in your camera to shoot movies (p. 168). The memory card supplied with the camera may be used without further formatting. z Be careful of the following while recording. - Do not touch the microphone (p. 38). - If you press a button, the sound of the button being pressed will also be recorded. - The camera will automatically adjust the exposure and white balance to suit the shooting conditions during recording. Please note, however, that the sounds made by the camera automatically adjusting the exposure may also be recorded. z The focus and optical zoom settings remain fixed for subsequent frames at the values selected for the first frame.