Canon Speedlite 320EX Instruction Manual - Page 41
Take the picture., Bulb Long Exposure Shooting
View all Canon Speedlite 320EX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
2 Take the picture. Check that the lamp is lit, point the remote control transmitter toward the camera, and press the remote release button. X The picture is taken two seconds later. When wireless flash shooting is enabled and the power switch on the 320EX is set to , the 320EX fires. Bulb (Long Exposure) Shooting When you press the remote release button during bulb shooting, the shutter opens two seconds later. Press the remote release button again to close the shutter. If the flash-ready lamp is not lit, pressing the remote release button does not take a picture. Be careful not to cover the remote control transmitter or wireless sensor of the 320EX with your hand. The remote control function has an operation range of about 5 m / 16.4 ft. from the front of the camera. Check the shooting results while performing remote control shooting. When the power switch on the 320EX is set to and you press the remote release button, a picture is taken two seconds later in the same way as with the Remote Controller RC-6. The 320EX does not fire. 39