Canon VB-S31D Mark II Network Camera Operation Guide - Page 114
[Camera] > [Camera] Setting General Camera Controls, Camera Name, Camera Control
View all Canon VB-S31D Mark II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
[Camera] > [Camera] Setting General Camera Controls Settings for the camera name and external input/output devices, and for camera use and installation settings. The following settings can be configured here. • Camera Name • Camera Control • Day/Night (when Auto is set) • Installation Conditions • Camera Position Control • External Input Device 1, 2 • External Output Device 1, 2 Camera Name Set the camera name. [Camera Name] Enter any camera name. Be sure to enter a name in [Camera Name]. Camera Control Set various controls for easier viewing of video. [Digital Zoom] HM4x H730 S30 Select this to enable or disable digital zoom. If [Enable] is selected, the area indicating digital zoom will be displayed next to the zoom slider (P. 57). Unlike optical zoom, the higher the digital zoom ratio, the lower the video quality. Note H730 If [Enable] is selected, the area indicating digital zoom will be displayed next to the zoom slider in [Camera] > [Initial Settings] only. [Enhanced Digital Zoom] HM4x Select this to enable or disable the enhanced digital zoom. When the video size is small, digital zoom can be used to enlarge it up to the maximum size resolution with reduced video deterioration. When [Enable] is selected, an area indicating the enhanced digital zoom and a horizontal line (blue) indicating the enhanced digital zoom telephoto end are displayed on the zoom slider of the Viewer (P. 57). 96