Canon VB-S31D Mark II Network Camera Operation Guide - Page 155
Sound Clip Upload 1 to 3, Audio Reception from Viewer], Browse File], Sound Clip Name]
View all Canon VB-S31D Mark II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
When set to [Enable], audio data transmission will pause while there is no sound input from the camera. This can reduce the load on the network used. [Audio Reception from Viewer] HM4x H730 Select to receive audio from Camera Viewer and RM Viewer. Received audio can be output from a speaker with an amplifier connected to the camera. Network 5 Setting Page Sound Clip Upload 1 to 3 HM4x H730 You can upload up to three sound clips for playback when an event is triggered. Note The sound clip is used when audio playback is set in [Event] > [External Device Input] (P. 150) or [Event] > [Intelligent Function] > the [Event] tab (P. 178). [Browse File] Specify the sound clip to upload and click [Add]. To be able to upload a sound clip, it must satisfy the following requirements. • Playback length: Less than 20 seconds • File Format: ".wav" (µ-law PCM 8bit. Sampling frequency 8000 Hz, monaural) If it is blank when you click [Apply], the sound clip registered in the camera will be deleted. To delete an uploaded sound clip, click [Delete] next to the name of the sound clip. [Sound Clip Name] Enter the name of the sound clip to upload. Be sure to enter the sound clip name. 137