Canon VB-S31D Mark II Network Camera Operation Guide - Page 133
Configuring View Restrictions
View all Canon VB-S31D Mark II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
Configuring View Restrictions Set a restrict view area and click [Apply] to restrict the capture range of the Camera Viewer. Important • If you have changed how the camera is installed, reconfigure the view restriction settings. • Check view restrictions again if you change the [Basic] > [Video] > [All Videos] > [Video Size Set] settings on the Setting Page. • When [Camera] > [Camera] > [Camera Control] > [Digital Zoom] or [Image Stabilizer] ( HM4x ) is changed on the Setting Page, check the view restriction settings again. 1 Select [Enable] in [View Restrictions]. Note To delete view restriction settings, select [Disable], and click [Apply]. 2 Set the restrict view area using the frame on the video display area or the panorama screen/full-view screen. Operate the camera angle using the frame on the video display area or the panorama screen/full-view screen to get the positioning value, and specify the restrict view area. Setting Page 5 [Upper Limit]/[Lower Limit]/[Left Limit]/[Right Limit] Operate the camera angle to the upper limit, lower limit, left limit, and right limit to set in the video display area. Click [Get value] in each position to reflect the values to the pan/tilt preview frame. Click [Preview] in [Upper Limit]/[Lower Limit]/[Left Limit]/[Right Limit] to move the preview frame to the upper limit, lower limit, left limit, and right limit of the current pan/tilt preview frame, respectively, and display it in the video display area. [Telephoto]/[Wide-angle] Operate the camera angle to the wide-angle/telephoto limit to set, using the frame on the video display area or the panorama screen. Click [Get value] in each position to reflect the values to the wide-angle preview frame/telephoto preview frame. Click [Preview] in [Telephoto]/[Wide-angle] to move the preview frame to the telephoto/wide-angle limit of the current wide-angle preview frame/telephoto preview frame and display it in the video display area. You can also set the telephoto/wide-angle limit range by directly moving the operation knob on the zoom slider up and down. This also moves each preview frame to the telephoto/wide-angle limit of the current wide-angle preview frame/telephoto preview frame and displays it in the video display area. If you dragged the telephoto knob to the upper limit and the wide-angle knob to the lower limit, the view restriction is disabled for each edge (there is no restriction). 115