Canon VB-S31D Mark II Network Camera Operation Guide - Page 151
Changing/Deleting a Privacy Mask, Privacy Mask Registration Area, Changing Mask Position and Size
View all Canon VB-S31D Mark II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
7 Click [Apply]. The privacy mask area is saved to the camera. Saved privacy mask areas are shown in the video display area and the privacy mask registration area. Important • Check privacy mask settings again if you change the [Basic] > [Video] > [All Videos] > [Video Size Set] settings. • You will need to set the position of the privacy mask again if you change the [Video Flip] setting in [Camera] > [Camera] > [Installation Conditions]. • If you reconfigure privacy mask settings after you changed the [Camera] > [Camera] > [Camera Control] > [Image Stabilizer], reconfigure all privacy mask positions and sizes. HM4x HM4x S30 S31 • If you change the privacy mask settings after saving a panorama image using the panorama function, you must use the panorama function to recreate the panorama image (P. 110). • After registering a privacy mask, pan, tilt and zoom the camera to confirm the areas you want to mask do not become visible when the camera angle is altered. • Privacy masks may deviate slightly from the specified position depending on the zoom position. Setting Page 5 Changing/Deleting a Privacy Mask Privacy Mask Registration Area This shows the positions of privacy mask areas in the entire area that can be captured by the camera. HM4x S30 S31 H730 S80x S90x (1) (1) (2) (3) (3) (4) (1) Entire Area That Camera Can Capture This shows the area that can physically be captured. HM4x S30 S31 If a panorama image is registered in the camera, the panorama image is displayed here. (2) View Restriction Area HM4x S30 S31 Appears in gray if view restrictions have been configured (P. 114). (3) Privacy Mask Areas Privacy mask areas with [Mask area] set to [Enable] (P. 132) are filled in. Privacy mask areas with [Mask area] set to [Disable] (P. 132) have diagonal lines displayed in them. (4) Preview Frame HM4x S30 S31 Indicates the current position of the camera shown in the video display area. Changing Mask Position and Size How to Select a Privacy Mask The following methods are available for selecting the privacy mask area. • Click the privacy mask area you want to change in the privacy mask registration area. • Click [Preview] in the mask area you want to display. • Click the privacy mark area shown in the video display area. 133