Canon Z155 Instruction Manual - Page 38

Troubleshooting In case of problems, check the table below before taking your camera to be repaired. Problem The blinks on the LCD panel. The 119 is not displayed on the LCD panel The shutter does not release The photographs are blurred. Cause •The battery is exhausted • No battery is loaded. •The battery is loaded with the wrong polarities. •The battery is co m p le te ly exhausted •The power is turned off. •The battery is exhausted •The film is not loaded correctly. •A rewound (used) film has been loaded •The shutter releases only after the red-eye reduction lamp is lit for about 1 second •The AF sensor was obscured when the shutter was released • In mode, you were standing directly in front of the camera when you pressed the shutter button. Remedy •Replace the battery. •Load the battery. •Reload the battery correctly. ■Replace the battery •Turn the power on. •Replace the battery •Reload the film correctly. •Remove the film and load a new one. •Hold the shutter button down until the shutter releases. •Change the flash mode •Ensure that the AF sensor is not obscured by your hair, fingers etc. •Make sure that you do not stand directly in front of the camera when pressing the shutter button Page 10 10 10 10 14 10 11 11, 13 23 26 19 21 [1-38