Canon iPF750 iPF750 User Manual - Page 681

Problems Regarding Paper Roll Paper Cannot be Inserted into the Paper Feed Slot Cause The roll paper is warped. Corrective Action Straighten out curls and reload the roll. Paper is jammed by the paper feed slot. Remove the jammed paper. (→P.120) (→P.145) Cannot load sheets Cause The paper source selection is incorrect. Corrective Action Press the Load button and select the paper source. Paper is not cut straight Cause The paper is bent or curled at the cut position. Paper rises by the ends of the cut position before it is cut. You are using paper that cannot be cut with the Cutter Unit. Corrective Action Straighten out any curling by the edges of the paper. Reload the paper correctly. Specify Manual in Cutting Mode in the Control Panel menu and use scissors or a cutting tool to cut the roll after printing. (→P.129) Paper is not cut Cause In the printer driver, No or Print Cut Guideline is specied in Auto Cut. In the Control Panel menu, Cutting Mode is set to Eject or Manual. Corrective Action Specify Yes in Auto Cut in the printer driver. If the Cutting Mode is Eject, press the Cut button to cut the paper. If the Cutting Mode is Manual, cut rolls with scissors or the like. Depression on the leading edge is left Cause Keeping a roll in the printer for a long time without printing on it may leave a depression on the leading edge. Corrective Action When printing quality is most important, we recommend setting TrimEdge Reload to On or Automatic so that the paper edge is automatically cut before printing. (→P.35) The size of clear lm cannot be detected Cause The Platen is soiled with ink or other substances. Corrective Action Open the Top Cover and clean the entire Platen. (→P.647) Troubleshooting 665