Canon iPF750 iPF750 User Manual - Page 69
Head Cleaning B, Replace P.head - clean print message
UPC - 660685015500
View all Canon iPF750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Control Panel Adjust Printer Setting Item Feed Adj. Auto(OtherPaper) Priority Quality Description, Instructions Specify this mode with paper not in the Paper Reference Guide. The printer prints and reads a test pattern for automatic adjustment of the feed amount. Note that this function takes more time and consumes more ink than Auto(GenuinePpr). (→P.614) Manual Use this mode with highly transparent media or other paper for which Auto(GenuinePpr) or Auto(OtherPaper) cannot be used. Print a test pattern for adjustment of the feed amount based on the type of paper. (→P.616) Adjust Length Adjustment Print A:High Print a test pattern for particular types of paper to compensate for paper stretching or shrinkage, after B: which you enter the amount of adjustment. Standard/ (→P.619) Draft Change A:High Displayed when you have selected Feed Priority > Settings Adj. Priority > Print Length. B: Adjustment relative to the amount of stretching or Standard/ shrinkage of the current paper. Draft Enter either the adjustment results from AdjustmentPrint or the discrepancy that you measured (as a percentage). For paper that tends to stretch, increase the feed amount by choosing a higher adjustment value. For paper that tends to shrink, decrease the feed amount by choosing a lower adjustment value. Adj. Fine Feed Displayed when you have selected Feed Priority > Adj. Priority > Automatic or Print Quality. Fine-tune the feed amount manually during printing. (→P.618) Mainte- Head Cleaning nance Clean the Printhead. (→P.632) Choose Head Cleaning A if printing is faint, oddly colored, or contains foreign substances. Choose Head Cleaning B if no ink is printed at all, or if printing is not improved by Head Cleaning A. Nozzle Check Print a test pattern to check the nozzles. Replace P.head When replacing the Printhead, choose Yes and follow the instructions on the screen. (→P.633) Not displayed during a warning message that the remaining Maintenance Cartridge capacity is low. Repl. maint cart When replacing the Maintenance Cartridge, choose Yes and follow the instructions on the screen. (→P.639) Head Info Indicates information about the printhead. GL2 Replot Print the previous GL2 print job again. Printer Parts 53