Canon iPF810 iPF810 User Manual - Page 122

Printing procedure Loading and Printing on Rolls These are the basic steps for loading and printing on rolls. Follow these steps to switch to a new roll or a roll of a different type or width before printing. Note • The procedure varies depending on the ManageRemainRoll setting in the printer menu and whether or not a barcode has been printed on the loaded roll. (→P.152) • Steps 6 and 7 are unnecessary if ManageRemainRoll is On and a barcode has been printed on the roll. • Step 7 is unnecessary if ManageRemainRoll is Off. • When Width Detection in the printer menu is Off, after you have selected the type of paper in step 6, you will need to enter the roll width. (→P.57) • For details on supported sizes and types of rolls, see "Paper Sizes" or the Paper Reference Guide. (→P.130) (→P.125) • If you are not using the optional Media Take-up Unit when printing long documents such as banners, spread a clean cloth or paper on the oor. Use the Stationary Output Stacker to prevent long printed documents from being soiled by the oor after they are printed. (→P.21) • If you prefer to wait for the ink to dry after printing and simply eject the document, you can deactivate automatic cutting and cut the paper manually. (→P.155) 1. Turn the printer on. (→P.29) 2. Select a roll as the paper source. (→P.133) 108 Basic Printing Workow