Canon iPF810 iPF810 User Manual - Page 81
System Setup, Keep Paper Size
UPC - 013803098464
View all Canon iPF810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Control Panel System Setup Setting Item Warning Buzzer Detect Mismatch Skip Take-Up Err Keep Paper Size Description, Instructions Set the buzzer. Choose On for the buzzer to sound once for warnings and three times for errors. Choose Warning for notication (display of a warning message) during printing if the type of paper specied in the printer menu does not match the type in the printer driver. Choose None to continue to print without notication. Choose Pause to have printing paused under these circumstances. In this case, you can continue printing by pressing the Online button. Choose On to continue with printing even if an error occurs with the Media Take-up Unit. Choose Off to have the printer pause before printing if a rewinding error occurs. Choose On to use the paper size setting as the basis for printing instead of other settings. The margin setting of the printer menu will be used instead of the margin setting of the printer driver if the latter is smaller, which may prevent text or images in the margin from being printed. Choose Off to use the printer driver settings instead. Even if the margin setting of the printer driver is smaller than that of the printer menu, text or images will not be cut off. However, this requires longer paper because the actual margin will be equal to the margin setting of the printer driver plus the margin setting of the printer menu. Paper Size Basis Sht Selection 1 Sht Selection 2 Noz. Check Freq. CarriageScanWdth If sheet size detection is activated, choose whether ISO A3+ or 13"x19"(Super B) is applied when an intermediate size is detected. If sheet size detection is activated, choose whether ISO B1 or 28"x40" (ANSI F) is applied when an intermediate size is detected. Specify the timing for automatic checks of nozzle clogging. Choose 1 page to check once per printed page. Choose 10 pages to check once per ten printed pages. Choose Automatic to have the printer automatically adjust the timing for checks based on the frequency of nozzle use. For specifying the carriage scan width during printing. Select Automatic for movement equivalent to the width of paper loaded. Selecting Fixed will reduce any soiling on the back of the paper, although printing may take a little longer. Printer Parts 67