Canon imageCLASS D680 imageCLASS D680 Set-Up Instructions - Page 6

6 INSTALL PRINTER DRIVER (CAPT) Windows 95/98/Me A Make sure the computer is turned off. Make sure the power cord of the machine is plugged into the power outlet B and the machine is connected to your computer using parallel cable (cable not included). Turn on the computer. Start up Windows. PLUG and PLAY is being C carried out and the FOUND NEW HARDWARE WIZARD (In Windows 95, New Hardware or Device Wizard) dialog box appears. Click CANCEL. D Set the CD-ROM into the CD-ROM drive of your computer. E Click Canon D600 INSTALL button. Add Printer Wizard dialog box appears. F Click NEXT. Add Printer Wizard dialog box (Local printer/ Network printer) selection appears. G Select LOCAL PRINTER, then click NEXT. Add Printer Wizard dialog box (Manufacturers/printers) selection appears. I Use BROWSE... to select the directory that contains the CAPT. For example, if you are using the CD-ROM to install the CAPT on Windows 95/98, and your CD-ROM drive is drive D:, browse to D:\English\Win9x, and click OK. K Select the printer port, the machine is connected to (usually LPT1:), then click NEXT. Add Printer Wizard dialog box (Printer name) appears. If you select a port, other than the port D600 is connected to, COM: or FILE: port, the machine will not print. H Click HAVE DISK... in the MANUFACTURERS/ PRINTERS dialog box. The Install From Disk dialog box appears. J Driver file selection dialog appears. Click NEXT. Printer port selection dialog box appears. L Click FINISH. If you wish to change printer name, type a new name into the text box. M When the installation is complete, the following dialog box appears. To close the dialog box, click OK.