Canon imageFORMULA CR-190i imageFORMULA CR-135i / CR-190i Instructions Manual - Page 55
Attach the Separation Roller with pushing the Separation OFF, Replace the Roller Cover.
View all Canon imageFORMULA CR-190i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
H Attach the Feed Roller. Align the notch on the roller axis with the hole on the roller. J Close the Feed Supporter to the right. IMPORTANT Push down the roller until it clicks into place. I Attach the Separation Roller with pushing the Separation OFF Mode Button. Align the notch on the roller axis with the hole on the roller. K Replace the Roller Cover. IMPORTANT Push down the roller until it clicks into place. 55
55
H
Attach the Feed Roller. Align the notch on the roller axis with
the hole on the roller.
IMPORTANT
Push down the roller until it clicks into place.
I
Attach the Separation Roller with pushing the Separation OFF
Mode Button. Align the notch on the roller axis with the hole
on the roller.
IMPORTANT
Push down the roller until it clicks into place.
J
Close the Feed Supporter to the right.
K
Replace the Roller Cover.