Canon imageFORMULA DR-C230 WA10 User Manual - Page 24

Specifying a Static IP Address for the, Device, Device Setting to Specify a Static IP, Address

Get Canon imageFORMULA DR-C230 PDF manuals and user guides View all Canon imageFORMULA DR-C230 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

4 Check that the scanner appears in the list. 5 Select the scanner in your application. Specifying a Static IP Address for the Device If a static IP address needs to be specified for the device, such as when using it as a wireless base station (access point), or on a network that does not include a DHCP server, perform the following procedure. 1 Connect this device to another device with one-to-one connection. For details, see "Connecting to Another Device with One-to-One Connection" (p. 21). 2 Start the web browser, and access the "http://192.168.0.10/" URL. The device's web page opens, and the login screen is displayed. 3 Specify the IP address for the device in the [Network Setting] screen of the web menu. For details, see "Using the Web Menu" (p. 37). Device Setting to Specify a Static IP Address Configure the settings as follows. 1 Hold the Wireless On/Off button for five seconds. Operation switches to wired LAN mode, and the Wireless lamp turns off. 2 Hold the Wireless On/Off button and the WPS/Reset button for five seconds. The device's DHCP setting will be disabled, and the Connection lamp lights orange. Wireless On/Off button WPS/Reset button Connection lamp CAUTION This operation is only possible when wireless settings are not configured on the device. 3 Start the web browser, and access the "http://192.168.0.10/" URL. The device's web page opens, and the login screen is displayed. 4 Specify the IP address for the device in the [Network Setting] screen of the web menu. For details, see "Using the Web Menu" (p. 37). 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
24
4
Check that the scanner appears in the list.
5
Select the scanner in your application.
Specifying a Static IP Address for the
Device
If a static IP address needs to be specified for the device, such as
when using it as a wireless base station (access point), or on a
network that does not include a DHCP server, perform the following
procedure.
1
Connect this device to another device with one-to-one
connection.
For details, see “Connecting to Another Device with One-to-One
Connection” (p. 21).
2
Start the web browser, and access the
The device’s web page opens, and the login screen is displayed.
3
Specify the IP address for the device in the [Network
Setting] screen of the web menu.
For details, see “Using the Web Menu” (p. 37).
Device Setting to Specify a Static IP
Address
Configure the settings as follows.
1
Hold the Wireless On/Off button for five seconds.
Operation switches to wired LAN mode, and the Wireless lamp
turns off.
2
Hold the Wireless On/Off button and the WPS/Reset
button for five seconds.
The device's DHCP setting will be disabled, and the Connection
lamp lights orange.
CAUTION
This operation is only possible when wireless settings are not
configured on the device.
3
Start the web browser, and access the
The device’s web page opens, and the login screen is displayed.
4
Specify the IP address for the device in the [Network
Setting] screen of the web menu.
For details, see “Using the Web Menu” (p. 37).
Wireless On/Off button
WPS/Reset button
Connection lamp