Canon imagePROGRAF GP-4000 imagePROGRAF GP-4000 / GP-2000 Setup Guide - Page 12
Close the top cover., Install the print head.
![]() |
View all Canon imagePROGRAF GP-4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
6 Install the print head. ● Align the print head so that the area enclosed by a circle in the diagram is facing you, and carefully push the print head firmly into the printer, ensuring that the part covered by the protective caps does not touch the carriage. 7 Pull the print head locking cover down toward you to lock the print head in place. 8 Push the print head lock lever all the way to the end. ● Push firmly until you hear a click sound. 9 Close the top cover. Note ● If the roll unit is installed, the roll unit calibration starts automatically after the print head is attached. If the roll holder is mounted on the roll unit at this time, calibration cannot be executed. Do not mount the roll holder on the roll unit until the setup has finished. 10
![](/manual_guide/products/canon-imageprograf-gp2000-imageprograf-gp4000-gp2000-setup-guide-a7d3ad5/12.png)