Canon imagePROGRAF iPF6350 iPF6300/iPF6350 Basic Guide No.2 - Page 32

Error Messages Respond to error messages as follows. Error messages Check the message and take the appropriate action. • Before borderless printing, move the blue platen switch. • Blue platen switch is dirty. • Borderless printng not possible. • Calibration There is a problem with the multi-sensor. • Cannot adjust paper feed. • Cannot adjust printhead. • Cannot calibrate. • Cannot cut paper. • Cannot detect papr • Cannot execute this command. Use other paper. • Cannot feed paper. • Cannot print as specified. • Check printed document. • Close Ink Tank Cover • End of paper feed. • Excessive temperature or humidity. • Execute printhead cleaning. • File read error. • GARO Wxxxx (x represents a number) • Hard disk error. • Hardware error. xxxxxxxx-xxxx (x represents a letter or number) • Ink insufficient. • Insufficient paper for job • Mail box full. Now printing without saving data. • Mail box nearly full. • Maint. cart. The level is low • Maintenance cartridge full. • Maintenance cartridge problem. • Manual printing is selected. • Manual printing is selected, but a roll is loaded. • Maximum jobs stored. • MediaType Mismatch • Move the blue platen switch No.xx to the right. (xx represents a number) • Multi-sensor error • No ink left. • No ink tank loaded. • No maintenance cartridge. • No Maintenance Cartridge capacity. • No Roll Unit. • No x printhead (x is L, R, or not displayed) • Not much ink is left. • Paper loaded askew. • Paper mismatch • Paper not aligned with right guide. • Paper size not detected. • PaprWidth Mismatch 32