Canon imagePROGRAF iPF6350 iPF6300/iPF6350 Basic Guide No.2 - Page 34
Error Message, Cause, Corrective Action - large format printer
View all Canon imagePROGRAF iPF6350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Error Messages Error Message GARO Wxxxx (x represents a number) No ink left. Ink insufficient. Not much ink is left. Close Ink Tank Cover No ink tank loaded. Wrong ink tank. Check printed document. Cannot adjust paper feed. Cause Corrective Action There is a problem with the print job. Try printing again, using the correct printer driver. It is also possible to continue printing in this state. However, you may not be able to obtain the desired printing results. There is no ink left. The ink level is low, so you cannot print, clean the Printhead, or do other operations that require ink. Open the Ink Tank Cover and replace the Ink Tank for which the Ink Lamp is flashing. (→ , Replacing Ink Tanks) Press ▲ or ▼ to select Rep. Ink Tank, and then press the OK button. Replace the Ink Tank that is low with a new Ink Tank. (→ , Replacing Ink Tanks) Press ▲ or ▼ to select Continue to print, and then press the OK button to resume printing. However, note that this error may affect the printing quality. If the printer is in Standby mode, press the OK button and replace the Ink Tank that is low with a new Ink Tank. (→ , Replacing Ink Tanks) Not much ink is left. Prepare a new Ink Tank. We recommend replacing the Ink Tank with a new Ink Tank at this point if you plan to print large-format or high-quantity jobs. The Ink Tank Cover is open. Close the Ink Tank Cover. The buzzer will stop once the error is cleared. There is no Ink Tank in the printer. Load or reload the Ink Tank. (→ , Replacing Ink Tanks) There is a problem with the Ink Tank. Replace it with a new Ink Tank. (→ , Replacing Ink Tanks) The Ink Tank in the printer is incompatible. Load an Ink Tank specified for use with the printer. (→ , Replacing Ink Tanks) The Printhead nozzles are becoming clogged. If printing is faint, clean the Printhead. (→ , If Printing is Faint) The Printhead nozzles are clogged. Execute Adj. Quality again, as follows. 1. Press the OK button to clear the error. 2. Print a test pattern to check the nozzles. (→"Checking for Nozzle Clogging," User Manual) 3. Clean the Printhead if the nozzles are clogged. (→ , If Printing is Faint) 4. Execute Adj. Quality again. (→ , If Banding Occurs) Highly transparent film is loaded that cannot be used for automatic feed amount adjustment. Press the OK button to clear the error, and then adjust the feed amount manually. (→"Manual Banding Adjustment (Adj. Quality)," User Manual) 34