Canon imagePROGRAF iPF780 User Guide - Page 460

Menu Settings GL2 Settings Line & Pen Manager Setting Item Pen Set- Define Palette up Reset Palette Smoothing Description, Instructions • If you choose Circle Setting iPF780 Restore Define Palette to the default palette settings. Choose whether to print arcs as smooth curved lines or as multiple connected line segments. • If you choose Software Operation is determined by the application. If nothing is specified by the application, the result is as shown in the figure. Control Panel Printer Menu ThickenFineLines AdjustFaintLines ProcessingOption Warning PageSizeProcess1 PageSizeProcess2 GL2 Set Print Interface EOP Timer 460 Setup TCP/IP IPv4 IPv4 Mode Note: By default, this is a 72-sided figure • If you choose Smooth Select On to print fine lines more distinctly. If fine lines are printed in colors that do not match the colors of other shapes, selecting Off may help produce the expected results. However, lines in some colors may appear broken. Select On to have any GL2-related warnings displayed. Set the position of the margin relative to the image range. Choose Off to set the margin outside the image range. Although the image will not be missing, you should print on paper larger than the size of the image range plus the margins. Choose On to set the margin inside the image range. The image may be missing depending on the layout. Change the method of handling image range information. Normally, leave the setting Off. Try On if the image is missing or you get a blank paper. Print GL2 settings information. Specify the timeout period before cancellation of print jobs that cannot be received by the printer. Choose whether the printer IP address is configured automatically or a static IP address is entered manually. User's Guide