Canon imagePROGRAF iPF780 User Guide - Page 629
Print Area, Paper
View all Canon imagePROGRAF iPF780 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 629 highlights
iPF780 Interface USB Ethernet Format Mode Connector Format Specification Protocols Print Area Internal port Full-speed (12 Mbps), high-speed (480 Mbps), bulk transfer Series B (4-pin) Internal port IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX/Auto-Negotiation, IEEE 802.3ab 1000Base-T/Auto-Negotiation, IEEE 802.3x Full Duplex IEEE 802.3az EEE SNMP (supports Canon-MIB), HTTP, TCP/IP (IPv4/IPv6) Ink For information on the ink the printer supports, see "Ink Tanks." ➔P.538 Paper For information on the types of paper the printer supports, refer to the Paper Reference Guide. (See "Displaying the Paper Reference Guide.") ➔P.364 Paper width For information on the paper widths the printer supports, see "Paper Sizes." ➔P.360 Minimum paper length Rolls 203.2 mm (8.0 in) Sheets 279.4 mm (11.0 in) Maximum printable length (*1) Rolls 18 m (19.7 yd) Sheets 1,600 mm (63.0 in) Thickness Rolls 0.07-0.8 mm (0.0028-0.031 in) Sheets 0.07-0.8 mm (0.0028-0.031 in) Roll maximum outer diameter 150 mm (6 in) or shorter Supported paper core inner diameter 2 inches / 3 inches Print area For details, see "Print Area." ➔P.629 *1: Varies depending on the operating system or application. Roll Holder Set Roll Holder Set RH2-33 Specifications Printer Specifications Print Area A margin required by the printer is added with respect to the size of paper loaded in the printer. Except in borderless printing, the actual printing area corresponds to the paper size minus the space for this margin. • Printable Area: The area that can be printed. Note • There is no margin (that is, a margin of 0 mm) during borderless printing on rolls. • Recommended Print Area: We recommend printing within this area. • To print so that your original matches the print area exactly, use an oversized paper size that includes the required margin. (See "Printing on Oversize Paper.") ➔P.76 Margins of Printable Area Margins of Recommended Print Area Top Edge Bottom Edge Sides Top Edge Bottom Edge Sides Sheets 3 mm (0.12 in) 23 mm (0.91 in) 3 mm (0.12 in) 20 mm (0.79 in) 23 mm (0.91 in) 5 mm (0.20 in) 629 Rolls 0/3 mm (0/0.12 in) 0/3 mm (0/0.12 in) 0/3 mm (0/0.12 in) 20 mm (0.79 in) 5 mm (0.20 in) 5 mm (0.20 in) User's Guide