Canon imagePROGRAF iPF780 User Guide - Page 461
DNS Domain Name, Pri. DNS SrvAddr
View all Canon imagePROGRAF iPF780 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 461 highlights
iPF780 Menu Settings Interface TCP/IP Setup Setting Item IPv4 Protocol DHCP BOOTP Description, Instructions Specify the protocol used to configure the IP address automatically. RARP IPv4 Settings IP Address Subnet Mask Default G/W Specify the printer network information when using a static IP address. Enter the IP address assigned to the printer, as well as the network subnet mask and default gateway. The value that was automatically configured is displayed if you have set IPv4 Mode to Automatic. DNS DNS Dync update Settings Specify whether DNS server registration is updated automatically. Pri. DNS SrvAddr Specify the DNS server address. Control Panel Sec. DNS SrvAddr DNS Host Name Specify the DNS host name. DNS Domain Name Specify the DNS domain name. IPv6 IPv6 Support Specify whether to connect via IPv6. IPv6 StlessAddrs Specify whether a IPv6 stateless address is used. Printer Menu DHCPv6 Specify whether DHCPv6 settings are used. DNS Settings DNS Dync update Statefull Addr Stateless Addr Specify whether DNS server registration is updated automatically. Pri. DNS SrvAddr Specify the DNS server address. Sec. DNS SrvAddr DNS Host Name Specify the DNS host name. DNS Domain Name Specify the DNS domain name. Ethernet Auto Detect Driver Specify the communication method. To apply your changes, choose Register Setting. Choose On for automatic configuration of the LAN communication protocol. Choose Off to use settings values of Comm.Mode and Ethernet Type. Comm.Mode Choose the LAN communication method. Ethernet Type Choose the LAN transfer rate. Spanning Tree Choose whether spanning-tree packets are supported over the LAN. MAC Address Indicates the MAC address. Interface Print Print interface settings information. Return Defaults Choose OK to restore Interface Setup settings to the default values. System Sleep Timer Setup Shut Down Timer Specify the period before the printer enters sleep mode. Sets the time until the printer turns off automatically. If no operations are performed on the printer for the duration of the time set in Shut Down Timer after entering Sleep mode, the printer automatically turns off. 461 Buzzer Choose On for the buzzer to sound once for warnings and three times for errors. User's Guide