Casio CTK7000 User Guide - Page 129
E-127
View all Casio CTK7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
4. Press the L-17 (PLAY/STOP) button. • This will start playback of the audio file and cause the L-17 (PLAY/STOP) button to change from flashing to lit. The time counter also will start counting up. • The following operations are supported during playback. To perform this operation: Fast forward Fast backward Pause Restart paused playback Do this: Hold down the L-15 (dFF) button or rotate the dial to the right.* Hold down the L-14 (sREW) button or rotate the dial to the left.* Press the L-16 (PAUSE) button. Press the L-16 (PAUSE) button. Lower playback volume Raise playback volume Center cancel Press the R-14 (-) button, which will display a volume setting screen. Rotating the dial to the left while this screen is displayed also will lower playback volume. Press the R-14 (+) button, which will display a volume setting screen. Rotating the dial to the right while this screen is displayed also will raise playback volume. Press the L-18 (PART SELECT) button. * Dial operation is supported only while the audio play screen is displayed. • Playback stops automatically when it reaches the end of a song. To stop playback part way through, press the L-17 (PLAY/STOP) button. 5. To exit the audio play mode, press the C-2 (AUDIO PLAY) button. • This returns to the mode screen (rhythm mode or song sequencer mode) that was displayed before you performed step 1 of this procedure. Recording and Playing Audio ■ About center cancel Center cancel can be used to cut out the vocal part (which is normally located in the center of the stereo field) from an audio file stored to a memory card from your computer. How successful center cancel is in cutting out the audio depends on the audio file you are playing back. Each press of the L-18 (PART SELECT) button toggles between center cancel and normal (no center cancel) playback. The current setting can be determined by checking the graphic formed inside the level indicator as shown below. Status Playback standby Playback in progress Normal Center cancel • When the MIC/INST parameter (page E-42) "Pan" setting is "0" (initial default value), center cancel is applied to all sound recorded from an external device connected to the T-8 (MIC IN) jack or the T-5 (INST IN) jack. • During audio record standby, you can exit the audio play mode by pressing the R-15 (EXIT) button. • During the above operation, you can press the C-2 (AUDIO PLAY) button to exit the audio play mode. E-127