Casio EX-S880RD Owners Manual - Page 111

IMPORTANT! • Anti Shake will not work unless the ISO sensitivity setting (page 135) is set to "Auto". • Though " " (Anti Shake) is displayed on the monitor screen following an automatic flash operation using the "Auto Flash" or "Red Eye Reduction" setting, or while the flash setting is "Flash On" or "Soft Flash", Anti Shake is disabled. • Shooting with Anti Shake can cause an image to appear somewhat coarser than normal and can cause slight deterioration of image resolution. • Anti Shake may not be able to eliminate the effects of hand or subject movement when movement is severe. • You can also use Anti Shake to reduce the effects of hand movement only while recording a movie. The effects of subject movement are not limited (page 96). • Anti Shake may not work with a very low shutter speed. If this happens, use a tripod to stabilize the camera. • The camera sometimes performs an automatic noise reduction operation to reduce digital noise in images recorded under certain lighting conditions. This operation causes the camera to take longer than normal to store the image and be ready for the next shot. Taking Bright Images without Flash The BEST SHOT "High Sensitivity" scene makes it possible for you to take natural looking images without using the flash, even when lighting is low Normal Snapshot (With flash) Snapshot with High Sensitivity 1. In the REC mode, press [BS]. 2. Use [S], [T], [W], and [X] to select the "High Sensitivity" scene and then press [SET]. 3. Press the shutter button to shoot the image. High Sensitivity will remain selected until you select a different BEST SHOT scene. B 111 USING BEST SHOT