Casio XJ 350 Owners Manual - Page 44
Auto Input Source Selection, Projection Operations
View all Casio XJ 350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Projection Operations Auto Input Source Selection When you turn on the projector, it checks the status of each input source (whether or not the input source is sending a signal) in the sequence shown below. It automatically selects the first input source it finds that is sending an input signal, and projects the applicable image. RGB terminal input (RGB/Component) VIDEO terminal input (VIDEO) S-VIDEO terminal input (S-VIDEO) If the RGB input terminal is connected to a computer and the S-VIDEO input terminal is connected to a video deck and signals are being supplied by both, for example, the projector automatically selects RGB input when it is turned on. The currently selected input source name is shown in the upper right corner of the projection screen. Input source name ęĎĉ z If the projector does not find any input signal, the message "No signal input" appears in place of the input source name. z Whether the displayed input source name shows [RGB] or [Component] depends on the current "Input Settings J RGB Input" (page 85) setting that is configured on the projector's setup menu. If the input source name shows this: RGB Component It means this input is selected: RGB Component video For information about configuring setup menu settings, see "Using the Setup Menu" on page 61. For information about component video, see "Connecting to a Component Video Output Device" on page 37. z Note that the projector does not select the input source automatically when "Off" is selected for the "Option Settings J Auto Input Detect" (page 89) setting on the setup menu. 44