Casio XJ 350 Owners Manual - Page 46
Projection Operations, To select the input source using remote controller keys
View all Casio XJ 350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Projection Operations To select the input source using remote controller keys On the remote controller, press the [RGB/COMPONENT], [VIDEO], or [S-VIDEO] key to select the input source you want. z The currently selected input source name is shown in the upper right corner of the projection screen. z If the currently selected input source is not sending an input signal, the message "No signal input" appears in place of the input source name. z Whether the displayed input source name shows [RGB] or [Component] depends on the current "Input Settings J RGB Input" (page 85) setting that is configured on the projector's setup menu. If the input source name shows this: RGB Component It means this input is selected: RGB Component video For information about configuring setup menu settings, see "Using the Setup Menu" on page 61. For information about component video, see "Connecting to a Component Video Output Device" on page 37. 46