Cisco 7975G Administration Guide - Page 134

Status Menu Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone Table 7-2 Status Messages on the Cisco Unified IP Phone 7975G (continued) Message No DNS server IP Programming Error Successful - MD5 TFTP access error TFTP Error TFTP file not found TFTP server not authorized Description Possible Explanation and Action A name was specified but DHCP or static IP configuration did not specify a DNS server address. • If the phone has a static IP address, verify that the DNS server has been configured. See the "Network Configuration Menu" section on page 4-5 section for details. • If you are using DHCP, the DHCP server has not provided a DNS server. Check the DHCP server configuration. The phone failed during programming. Attempt to resolve this error by power cycling the phone. If the problem persists, contact Cisco technical support for additional assistance. The phone attempted an 802.1X transaction and The phone achieved 802.1X authentication. authentication achieved. TFTP server is pointing to a directory that does not exist. • If you are using DHCP, verify that the DHCP server is pointing to the correct TFTP server. • If you are using static IP addresses, check configuration of TFTP server. See the "Network Configuration Menu" section on page 4-5 for details on assigning a TFTP server. The phone does not recognize an error code provided by the TFTP server. Contact the Cisco TAC. The requested load file (.bin) was not found in the TFTPPath directory. Check the load ID assigned to the phone (from Cisco Unified Communications Manager, choose Device > Phone). Verify that the TFTPPath directory contains a .bin file with this load ID as the name. The specified TFTP server could not be found in the phone's CTL. • The DHCP server is not configured properly and is not server the correct TFTP server address. In this case, update the TFTP server configuration to specify the correct TFTP server. • If the phone is using a static IP address, the phone may be configured with the wrong TFTP server address. In this case, enter the correct TFTP server address in the Network Configuration menu on the phone. • If the TFTP server address is correct, there may be a problem with the CTL file. In this case, run the CTL client and update the CTL file, making sure that the proper TFTP servers are included in this file. Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 6.1 7-8 OL-14640-01