Cisco 7975G Administration Guide - Page 47
Adding Phones with Auto-Registration, Method, Requires MAC, Address?, Notes
UPC - 882658140457
View all Cisco 7975G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network Adding Phones to the Cisco Unified Communications Manager Database Table 2-5 provides an overview of these methods for adding phones to the Cisco Unified Communications Manager database. Table 2-5 Methods for Adding Phones to the Cisco Unified Communications Manager Database Method Auto-registration Requires MAC Address? No Auto-registration with No TAPS Using the Cisco Unified Yes Communications Manager Administration Using BAT Yes Notes • Results in automatic assignment of directory numbers. • Not available when security or encryption is enabled. Requires auto-registration and the Bulk Administration Tool (BAT); updates the Cisco Unified Communications Manager database with the MAC address and DNs for the device when user calls TAPS from the phone. Requires phones to be added individually Can add groups of same model of phone. Can schedule when phones are added to the Cisco Unified Communications Manager database. Adding Phones with Auto-Registration By enabling auto-registration before you begin installing phones, you can: • Add phones without first gathering MAC addresses from the phones. • Automatically add a Cisco Unified IP Phone to the Cisco Unified Communications Manager database when you physically connect the phone to your IP telephony network. During auto-registration, Cisco Unified Communications Manager assigns the next available sequential directory number to the phone. • Quickly enter phones into the Cisco Unified Communications Manager database and modify any settings, such as the directory numbers, from Cisco Unified Communications Manager. • Move auto-registered phones to new locations and assign them to different device pools without affecting their directory numbers. Note Cisco recommends you use auto-registration to add less than 100 phones to your network. To add more than 100 phones to your network, use the Bulk Administration Tool (BAT). See the "Adding Phones with BAT" section on page 2-11. OL-14640-01 Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 6.1 2-9