Cisco 7975G Administration Guide - Page 62
Mounting the Phone to the Wall, Before You Begin
UPC - 882658140457
View all Cisco 7975G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Adjusting the Placement of the Cisco Unified IP Phone Chapter 3 Setting Up the Cisco Unified IP Phone Figure 3-2 Connecting a Cable Lock to the Cisco Unified IP Phone 7975G Mounting the Phone to the Wall You can mount the Cisco Unified IP Phone on the wall by using the footstand as a mounting bracket or you can use special brackets available in a Cisco Unified IP Phone wall mount kit. (Wall mount kits must be ordered separately from the phones.) If you attach the phone to a wall by using the standard footstand and not the wall mount kit, you need to supply the following tools and parts: • Screwdriver • Screws to secure the Cisco Unified IP phone to the wall See Figure 3-3 for a graphical representation of the phone parts. Before You Begin To ensure that the handset attaches securely to a wall-mounted phone, remove the handset wall hook from the handset rest, rotate the hook 180 degrees, and reinsert the hook. Turning the hook exposes a lip on which the handset catches when the phone is vertical. For an illustrated procedure, refer to Installing the Wall Mount Kit for the Cisco Unified IP Phone. Caution Use care not to damage wires or pipes located inside the wall when securing screws to wall studs. 3-10 Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 6.1 OL-14640-01