Cisco 7975G Administration Guide - Page 71

Chapter 4 Configuring Settings on the Cisco Unified IP Phone Network Configuration Menu Table 4-1 Settings Configurable from the Phone (continued) Category VLAN settings Port settings Description Network Configuration Menu Option • Admin. VLAN ID allows you to change the Admin. VLAN ID administrative VLAN used by the phone. PC VLAN • PC VLAN allows PCs plugged in behind the phone to interoperate with third-party switches that do not strip VLAN tags on the native VLAN for that port. Allow you to set the speed and duplex of the network and SW Port Configuration access ports. PC Port Configuration Related Topics • Displaying a Configuration Menu, page 4-2 • Unlocking and Locking Options, page 4-3 • Editing Values, page 4-3 • Network Configuration Menu, page 4-5 • Device Configuration Menu, page 4-10 Network Configuration Menu The Network Configuration menu provides options for viewing and making a variety of network settings. Table 4-2 describes these options and, where applicable, explains how to change them. For information about how to access the Network Configuration menu, see the "Displaying a Configuration Menu" section on page 4-2. Note The phone also has a Network Configuration menu that you access directly from the Settings menu. For information about the options on that menu, see the "Network Configuration" section on page 4-25. Before you can change an option on this menu, you must unlock options as described in the "Unlocking and Locking Options" section on page 4-3. The Edit, Yes, or No softkeys for changing network configuration options appear only if options are unlocked. For information about the keys you can use to edit options, see the "Editing Values" section on page 4-3. Table 4-2 Network Configuration Menu Options Option DHCP Server BOOTP Server MAC Address Description To Change IP address of the Dynamic Host Configuration Protocol (DHCP) server from which the phone obtains its IP address. Display only-Cannot configure. Indicates whether the phone obtains its configuration Display only-Cannot configure. from a Bootstrap Protocol (BootP) server instead of from a DHCP server. Unique Media Access Control (MAC) address of the phone. Display only-Cannot configure. OL-14640-01 Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 6.1 4-5