Cisco 827H Hardware Installation Guide - Page 28

Installing the Router Chapter 2 Installation Table 2-3 lists the Ethernet devices you can connect to Cisco 827H and SOHO 77H routers, the connections for each device, and the settings of the router TO HUB/TO PC button (the default setting is IN). Table 2-3 Ethernet Device Connections for Cisco 827H and SOHO 77H Routers Network Device Connected to Router Router Port Ethernet Cable Type1 Router TO HUB/TO PC Button Setting Network Device Button Setting2 Hub with equivalent to ETHERNET port 4 router TO HUB/TO PC button Straight-through IN MDI (IN) Hub with equivalent to ETHERNET port 4 router TO HUB/TO PC button Straight-through OUT MDI-X (OUT) Hub without equivalent ETHERNET port 4 to router TO HUB/TO PC button Straight-through OUT MDI-X (OUT) Server, PC, or ETHERNET port 4 Straight-through OUT - workstation Hub with equivalent to ETHERNET port 1, 2, 3 Crossover N/A router TO HUB/TO PC button MDI (IN) Hub with equivalent to ETHERNET port 1, 2, 3 Straight-through N/A router TO HUB/TO PC button MDI-X (OUT) Hub without equivalent ETHERNET port 1, 2, 3 Crossover N/A to router TO HUB/TO PC button MDI-X (OUT) Server, PC, or ETHERNET port 1, 2, 3 Straight-through N/A - workstation 1. Cisco provides a yellow straight-through cable. You provide crossover or additional straight-through cables. For cable specifications, see Appendix A, "Specifications and Cables." 2. Hub vendors choose different names for the button that controls the cable selection. This table uses the Cisco 1528 Micro Hub 10/100 with an MDI/MDI-X button as an example. Determine the button name and setting for your particular hub. See your hub documentation for details. Cisco 827 and SOHO 77 Routers Hardware Installation Guide 2-8 78-6854-03