Cisco 827H Hardware Installation Guide - Page 33

Chapter 2 Installation Installing the Router Table 2-4 Recommended Vendors for Master Sockets Required for United Kingdom Vendor Name RS Components Tandy Product Name Avro Pacific Telephone Ring Adapter (part number 303-2000) Export Adapter (part number 2797057) For More Information http://www.rswww.com/ http://www.tandy.co.uk/ Connect a Terminal or PC to the Router's Console Port (Optional) You can connect either a terminal or a PC to the router's console port. You can use the terminal or PC for configuring the software via the command line interface (CLI) or for troubleshooting. To connect a terminal or PC, follow the steps in Figure 2-7. (Figure 2-7 depicts a Cisco 827-4V, but the process applies to connecting all Cisco 827 series routers and SOHO 77 series routers.) Note Unless you are an experienced network administrator, it is recommended that you use the Cisco Router Web Setup software to configure the router. Use of this software is described in the "Using Cisco Router Web Setup to Configure the Router" section on page 2-16. Figure 2-7 Connecting a Terminal or PC Cisco 827-4V router TO TO HUB PC ETHERNET CONSOLE ADSL Model Cisco 827-4V 1 PHONE 4 3 2 1 +5,+12,-12,-24,-71 VDC 1. Connect light blue cable to CONSOLE port. 2. Connect DB-9 connector to terminal or PC. 65562 If you have experience configuring Cisco routers and prefer to use the CLI, refer to the Cisco 827 Router Software Configuration Guide for instructions on configuring the router. 78-6854-03 Cisco 827 and SOHO 77 Routers Hardware Installation Guide 2-13