Cisco ASR1004-20G-SEC/K9 Software Guide - Page 113
show ip interface brief, sipbase, sipspa, issu loadversion rp, Step 11
View all Cisco ASR1004-20G-SEC/K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Chapter 4 Software Upgrade Process ISSU Upgrade for Redundant Platforms Step 11 Command or Action request platform software package install rp active-RP file URL-to-active-file-system:asr1000rp1-{sipbase,sip spa}*version*.pkg slot SIP-slot-number force Repeat this step for each SIP installed in the router before moving onto the next step. Purpose Upgrades the SIP and SPA subpackages for each SIP on the router. Note This step must be completed one SIP at a time, and repeated for each SIP installed on the router before performing the next step. Step 12 Example: Router# request platform software package install rp 0 file bootflash:asr1000rp1-{sipbase,sipspa}*02.02.01. 122-33.XNB1*.pkg slot 0 force Router# request platform software package install rp 0 file bootflash:asr1000rp1-{sipbase,sipspa}*02.02.01. 122-33.XNB1*.pkg slot 1 force Router# request platform software package install rp 0 file bootflash:asr1000rp1-{sipbase,sipspa}*02.02.01. 122-33.XNB1*.pkg slot 2 force Tip Note You can use the show ip interface brief command to identify which slots contain SIPs and SPAs. The interfaces with three numbers (in the form SIP-number/SPA-number/interface-number) identify the SIP and SPA locations in the router. The pattern options used in this CLI (sipbase and sipspa) were introduced in Cisco IOS XE Release 2.1.2 and are not available in previous Cisco IOS XE Releases. See the "ISSU Procedures (Prior to Cisco IOS XE Release 2.1.2)" section on page 4-73 for pre-Cisco IOS XE Release 2.1.2 ISSU upgrade procedures. request platform software package install rp active-RP file URL-to-active-file-system:asr1000rp1-esp*version*. pkg slot standby-ESP-slot request platform software package install rp active-RP file URL-to-active-file-system:asr1000rp1-esp*version*. pkg slot active-ESP-slot Upgrades the ESP Base subpackage on the standby and the active ESPs. After entering the issu loadversion rp command on the active RP, the ESP switchover will occur automatically. Minimal traffic interruption will occur as a result of this switchover. Step 13 Step 14 Example: Router# request platform software package install rp 0 file bootflash:asr1000rp1-esp*02.02.01.122-33.XNB1*. pkg slot 1 Router# request platform software package install rp 0 file bootflash:asr1000rp1-esp*02.02.01.122-33.XNB1*. pkg slot 0 request platform software package install rp active-RP file URL-to-active-file-system:asr1000rp*version*.pkg force Example: Upgrades all of the sub-packages on the active RP. Note This step is required to ensure that all subpackages on the router were upgraded as part of this procedure, and might upgrade some subpackages that would otherwise be missed in the process. Router# request platform software package install rp 0 file bootflash:asr1000rp1-rp*02.02.01.122-33.XNB1*.p kg force show version active-RP provisioned show version active-RP installed (Optional) Confirms the subpackages are provisioned and installed. Example: Router# show version r0 provisioned Router# show version r0 installed OL-16506-10 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-51