Cisco ASR1004-20G-SEC/K9 Software Guide - Page 80
ISSU Procedures Prior to Cisco IOS XE, Release 2.1.2 on show ip interface brief
View all Cisco ASR1004-20G-SEC/K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
ISSU Upgrade for Redundant Platforms Chapter 4 Software Upgrade Process Step 12 Step 13 Command or Action Purpose issu loadversion rp active-RP file URL-to-active-file-system:asr1000rp1-{sipbase,sip spa}*version*.pkg slot SIP-slot-number force issu commitversion Repeat this step for each SIP installed in the router before moving onto the next step. Upgrade the SIP and SPA subpackages for each SIP on the router. Note This step must be completed one SIP at a time, and repeated for each SIP installed on the router before performing the next step. Tip Example: Router# issu loadversion rp 0 file bootflash:asr1000rp1-{sipbase,sipspa}*02.02.01. 122-33.XNB1*.pkg slot 0 force Router# issu commitversion Router# issu loadversion rp 0 file bootflash:asr1000rp1-{sipbase,sipspa}*02.02.01. 122-33.XNB1*.pkg slot 1 force Router# issu commitversion Router# issu loadversion rp 0 file bootflash:asr1000rp1-{sipbase,sipspa}*02.02.01. 122-33.XNB1*.pkg slot 2 force Router# issu commitversion Note You can use the show ip interface brief command to identify which slots contain SIPs and SPAs. The interfaces with three numbers (in the form SIP-number/SPA-number/interface-number) identify the SIP and SPA locations in the router. The pattern options used in this CLI (sipbase and sipspa) were introduced in Cisco IOS XE Release 2.1.2 and are not available in previous Cisco IOS XE Releases. See the "ISSU Procedures (Prior to Cisco IOS XE Release 2.1.2)" section on page 4-73 for pre-Cisco IOS XE Release 2.1.2 ISSU upgrade procedures. issu loadversion rp active-RP file URL-to-active-file-system:asr1000rp1-esp*version*. pkg slot standby-ESP-slot issu commitversion issu loadversion rp active-RP file URL-to-active-file-system:asr1000rp1-esp*version*. pkg slot active-ESP-slot issu commitversion Upgrade the ESP Base subpackage on the standby and the active ESPs. After entering the issu loadversion rp command on the active RP, the ESP switchover will occur automatically. Minimal traffic interruption will occur as a result of this switchover. Step 14 Step 15 Example: Router# issu loadversion rp 0 file bootflash:asr1000rp1-esp*02.02.01.122-33.XNB1*. pkg slot 1 Router# issu commitversion Router# issu loadversion rp 0 file bootflash:asr1000rp1-esp*02.02.01.122-33.XNB1*. pkg slot 0 Router# issu commitversion issu loadversion rp active-RP file URL-to-active-file-system:asr1000rp*version*.pkg force Example: Router# issu loadversion rp 0 file bootflash:asr1000rp1-rp*02.02.01.122-33.XNB1*.p kg force Upgrade all of the subpackages on the active RP. Note This step is required to ensure that all subpackages on the router were upgraded as part of this procedure, and might upgrade some subpackages that would otherwise be missed in the process. show version active-RP provisioned show version active-RP installed (Optional) Confirm that the subpackages are provisioned and installed. Example: Router# show version r0 provisioned Router# show version r0 installed 4-18 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-10