Cisco IE-3000-8TC Getting Started Guide - Page 2

Cisco IE 3000 Switch Getting Started Guide For additional installation and configuration information for Cisco IE 3000 switches, see the Cisco IE 3000 documentation on Cisco.com. For system requirements, important notes, limitations, open and resolved bugs, and last-minute documentation updates, see the release notes, also on Cisco.com. When you use the online publications, refer to the documents that match the Cisco IOS software version running on the switch. The software version is on the Cisco IOS label on the switch rear panel. For translations of the warnings that appear in this publication, see the Regulatory Compliance and Safety Information for the Cisco IE 3000 Switch that accompanies this guide. Taking Out What You Need Follow these steps: 1. Unpack and remove the switch and the accessory kit from the shipping box. 2. Verify that you have received the items shown on page 3. If any item is missing or damaged, contact your Cisco representative or reseller for instructions. 3. Unpack and remove any optional expansion modules from their shipping boxes. 4. Return the packing material to the shipping containers, and save it for future use. Note For information about using the switch with the optional PWR-IE3000-AC power converter module, see the hardware installation guide on Cisco.com. To rack-mount your switch, order the rack-mount adapter (STK-RACKMNT-2955=). This is not part of the switch accessory kit. Cisco IE 3000 Switch Getting Started Guide 2 OL-16234-01