Cisco IE-3000-8TC Getting Started Guide - Page 4
Cisco IEM-3000-8TM first., Step 1
View all Cisco IE-3000-8TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Cisco IE 3000 Switch Getting Started Guide Follow these steps to connect the expansion modules to the switch. Step 1 Remove the right side panel by firmly grasping both sides in the middle and pulling it outward. If necessary, use a flat-blade screwdriver to pry open the side panel. 202334 Step 2 Remove the EMI protective cover from the connector. 203759 Step 3 Push the upper module latches up and the lower module latches down, and then slide the switch and module together. Note If you are installing a Cisco IEM-3000-8TM module and a Cisco IEM-3000-8FM module, install the Cisco IEM-3000-8TM first. Cisco IE 3000 Switch Getting Started Guide 4 OL-16234-01 202335
Cisco IE 3000 Switch Getting Started Guide
4
Cisco IE 3000 Switch Getting Started Guide
OL-16234-01
Follow these steps to connect the expansion modules to the switch.
Step 1
Remove the right side panel by firmly
grasping both sides in the middle and pulling
it outward. If necessary, use a flat-blade
screwdriver to pry open the side panel.
Step 2
Remove the EMI protective cover from the
connector.
Step 3
Push the upper module latches up and the
lower module latches down, and then slide the
switch and module together.
Note
If you are installing a Cisco
IEM-3000-8TM module and a Cisco
IEM-3000-8FM module, install the
Cisco IEM-3000-8TM first.
202334
203759
202335