Cisco IE-3000-8TC Getting Started Guide - Page 7
Step 6, client is disabled on your PC. You might also need to enter a URL in your browser, such - express setup
View all Cisco IE-3000-8TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Cisco IE 3000 Switch Getting Started Guide Step 6 Connect a Category 5 Ethernet cable (not provided) from the blinking switch port to the Ethernet port on your PC. 1 The port LEDs on your PC and the switch blink green while the switch configures the connection. 201879 Step 7 Step 8 When the Setup LED turns solid green, start a browser session on the PC. The Express Setup window automatically appears. If the window does not appear, verify that any proxy settings or pop-up blockers are disabled on your browser and that any wireless client is disabled on your PC. You might also need to enter a URL in your browser, such as Cisco.com or another well-known website. If you need help, see the "In Case of Difficulty" section on page 25. Note If the switch has been previously configured, the device manager page appears. You can use it to change the switch IP address. OL-16234-01 Cisco IE 3000 Switch Getting Started Guide 7