Cisco UC560-FXO-K9 Quick Start Guide - Page 13
Installing the Compact Flash Guard, Front, Panel,
View all Cisco UC560-FXO-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
195673 Installing the Compact Flash Guard The compact flash (CF) guard provides protection for the compact flash memory. To install the CF-guard: STEP 1 Locate the compact flash slot of the front of the UC 560. See Front Panel, page 5. STEP 2 Slip the right tab on the CF-Guard into the slot on the right side of the compact flash opening. STEP 3 Place the cover against the surface of the memory slot, aligning the attachment screw on the left side of the CF-Guard with the screw hole in the panel. STEP 4 Tighten the attachment screw on the left side of the CF-guard by using the supplied T5 Torx wrench. CAUTION Do not remove the CF-guard when the UC 560 is powered on and running. Cisco Unified Communications 500 Series Model UC 560 Quick Start Guide 11