Cisco UC560-FXO-K9 Quick Start Guide - Page 16
Verifying the Hardware Installation
View all Cisco UC560-FXO-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
5 Verifying the Hardware Installation To verify the hardware installation, complete the following tasks: • Check the status of the UC 560 by looking at the LEDs on the front panel See LEDs, page 7. • Check that the switch is connected is connected to the expansion port. • To test IP connectivity, launch a Web browser and enter http://192.168.10.1. When the authentication window appears, this means that your system is active. • Make sure that each connected IP phone displays an internal extension number or a line number, on at least one of the phone line buttons. Verify the phone connectivity by making a call from one phone to another. NOTE If you need help resolving a problem, go to the Cisco Small Business Support Community website at: http://www.cisco.com/ go/smallbizsupport. For technical documentation and other links, see Suggested Next Steps, page 19 and Where to Go From Here, page 20. 14 Cisco Unified Communications 500 Series Model UC 560 Quick Start Guide