Cisco UC560-FXO-K9 Quick Start Guide - Page 20
The Wizard requires that you change the default administrator
View all Cisco UC560-FXO-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
STEP 1 Click Next and follow the prompts to complete the installation. STEP 2 After the wizard completes: • Verify Internet connectivity by going to: http://www.cisco.com. • Test calls to and from the PSTN. • Test calls to voice mail and Auto Attendant (AA), if configured. • Verify that the IP phones show the correct date and time. NOTE The Wizard requires that you change the default administrator login and password. Use the new username and password to access and administer the UC 560. Congratulations! The basic installation of the UC 560 is complete. 18 Cisco Unified Communications 500 Series Model UC 560 Quick Start Guide
18
Cisco Unified Communications 500 Series Model UC 560 Quick Start Guide
S
TEP
1
Click
Next
and follow the prompts to complete the installation.
S
TEP
2
After the wizard completes:
•
Verify Internet connectivity by going to:
.
•
Test calls to and from the PSTN.
•
Test calls to voice mail and Auto Attendant (AA), if configured.
•
Verify that the IP phones show the correct date and time.
N
OTE
The Wizard requires that you change the default administrator
login and password. Use the new username and password to
access and administer the UC 560.
Congratulations! The basic installation of the UC 560 is complete.