Cisco VC220 User Manual - Page 10
Basic Ethernet Setup, Connect the supplied power adapter 3 from the Cisco VC 220 - camera
View all Cisco VC220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Basic Ethernet Setup Follow these steps to perform a basic Ethernet setup. STEP 1 Connect any external devices to the general I/O terminal block, if you have sensors and alarms (1). STEP 2 Connect your Cisco VC 220 camera to a router or a switch using an Ethernet cable (2). STEP 3 Connect the supplied power adapter (3) from the Cisco VC 220 camera to a power outlet. Router or Switch 1 1: Power 2: Digital output 3: Digital input 4: Ground 2 3 10 VC 220 Dome WDR Day/Night PoE Network Camera Quick Start Guide
10
VC 220 Dome WDR Day/Night PoE Network Camera Quick Start Guide
Basic Ethernet Setup
Follow these steps to perform a basic Ethernet setup.
S
TEP
1
Connect any external devices to the general I/O terminal block, if
you have sensors and alarms (1).
S
TEP
2
Connect your Cisco VC 220 camera to a router or a switch using an
Ethernet cable (2).
S
TEP
3
Connect the supplied power adapter (3) from the Cisco VC 220
camera to a power outlet.
2
3
Router or Switch
1: Power
2: Digital output
3: Digital input
4: Ground
1