Cisco WAP2000 User Guide - Page 32
Appendix D - setup
UPC - 745883578337
View all Cisco WAP2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Appendix D Specifications Appendix D: Specifications Specifications Model WAP2000 Standards IEEE802.11g, IEEE802.11b, IEEE802.3, IEEE802.3u, IEEE802.3af (Power over Ethernet), 802.1p (QoS priority), 802.1Q (VLAN), 802.1X (Security Authentication), 802.11i - Ready (Security WPA2), 802.11e - Ready (Wireless QoS), 802.11F (Wireless Roaming) Ports 10BASE-T/100 BASE-TX Ethernet, 12 VDC Power Buttons Reset Cabling Type UTP CAT 5 LEDs Power, PoE, Wireless, Ethernet Operating System Linux Setup/Config WebUI Built in Web UI for Easy browser-based configuration (HTTP/HTTPS) Management SNMP Version SNMP Version 1, 2c, 3 Event Logging E-mail Notification Remote Syslog Web F/W Upgrade Firmware Upgradable Through Web-Browser Diags: Flash, etc. Flash, RAM, LAN, WLAN DHCP DHCP Client Operating Modes Access Point Access Point Mode, point-to-point Bridge Mode, point-to-multipoint Bridge Mode, Repeater Mode Wireless Spec/Modulation Radio and Modulation Type: 802.11b/DSSS, 11g/OFDM Channels Operating Channels: 11 North America, 13 Most of Europe (ETSI and Japan) Wireless-G Access Point with Power Over Ethernet # of Internal Ant. None # of External Ant. 2 (Omnidirectional) 3 dBi SMA detachable Transmit Power Antenna Gain Transmit Power (Adjustable) @ Normal Temp Range: 11b - 18 dBm; 11g - 16 dBm 3 dBi Receiver Sensitivity 11.g: 54Mbps@ -72dBm, 11.b: 11Mbps@ -85dBM Security WEP/WPA/WPA2 WEP 64bit/128 bit, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2-ENT Access Control Wireless Connection Control: MAC-Based SSID Broadcast SSID Broadcast Enable/Disable 802.1X IEEE 802.1X support Wireless Client Isolation Wireless Client devices can be isolated from each other either within an SSID or between two SSIDs Quality of Service QoS 4 Queues WMM Wireless priority General Wireless roaming based on IAPP Load Balancing Auto-channel selection Environmental Dimensions 8.66" x 6.69" x 1.50" (220 x 170 x 38 mm) Weight 1.69 lb (0.765 kg) Power 12V 1A DC input and IEEE802.3af Compliant PoE Max Power Draw: 3.48W Certification FCC, ICES-003, CE Operating Temp. 14 to 131ºF (-10 to 55ºC) Storage Temp. -22 to 158ºF (-30 to 70ºC) Operating Humidity 10 to 90%, Noncondensing Storage Humidity 5 to 95%, Noncondensing 28