Cisco WS-C3560E-48PD-SF Command Reference - Page 170
ip arp inspection vlan logging
View all Cisco WS-C3560E-48PD-SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
ip arp inspection vlan logging Chapter 2 Catalyst 3560 Switch Cisco IOS Commands ip arp inspection vlan logging Use the ip arp inspection vlan logging global configuration command to control the type of packets that are logged per VLAN. Use the no form of this command to disable this logging control. ip arp inspection vlan vlan-range logging {acl-match {matchlog | none} | dhcp-bindings {all | none | permit}} no ip arp inspection vlan vlan-range logging {acl-match | dhcp-bindings} This command is available only if your switch is running the IP services image, formerly known as the enhanced multilayer image (EMI). Syntax Description vlan-range Specify the VLANs configured for logging. You can specify a single VLAN identified by VLAN ID number, a range of VLANs separated by a hyphen, or a series of VLANs separated by a comma. The range is 1 to 4094. acl-match {matchlog | Specify that the logging of packets is based on access control list (ACL) none} matches. The keywords have these meanings: • matchlog-Log packets based on the logging configuration specified in the access control entries (ACE). If you specify the matchlog keyword in this command and the log keyword in the permit or deny ARP access-list configuration command, Address Resolution Protocol (ARP) packets permitted or denied by the ACL are logged. dhcp-bindings {permit | all | none} • none-Do not log packets that match ACLs. Specify the logging of packets is based on Dynamic Host Configuration Protocol (DHCP) binding matches. The keywords have these meanings: • all-Log all packets that match DHCP bindings. • none-Do not log packets that match DHCP bindings. • permit-Log DHCP-binding permitted packets. Defaults All denied or all dropped packets are logged. Command Modes Global configuration Command History Release 12.2(20)SE Modification This command was introduced. 2-138 Catalyst 3560 Switch Command Reference 78-16405-05