Cisco WS-C3560E-48PD-SF Command Reference - Page 35
aaa authentication dot1x
View all Cisco WS-C3560E-48PD-SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands aaa authentication dot1x aaa authentication dot1x Use the aaa authentication dot1x global configuration command to specify the authentication, authorization, and accounting (AAA) method to use on ports complying with IEEE 802.1x. Use the no form of this command to disable authentication. aaa authentication dot1x {default} method1 no aaa authentication dot1x {default} Syntax Description default method1 Use the listed authentication method that follows this argument as the default method when a user logs in. Enter the group radius keywords to use the list of all RADIUS servers for authentication. Note Though other keywords are visible in the command-line help strings, only the default and group radius keywords are supported. Defaults No authentication is performed. Command Modes Global configuration Command History Release 12.1(19)EA1 Modification This command was introduced. Usage Guidelines The method argument identifies the method that the authentication algorithm tries in the given sequence to validate the password provided by the client. The only method that is truly IEEE 802.1x-compliant is the group radius method, in which the client data is validated against a RADIUS authentication server. If you specify group radius, you must configure the RADIUS server by entering the radius-server host global configuration command. Use the show running-config privileged EXEC command to display the configured lists of authentication methods. Examples 78-16405-05 This example shows how to enable AAA and how to create an IEEE 802.1x-compliant authentication list. This authentication first tries to contact a RADIUS server. If this action returns an error, the user is not allowed access to the network. Switch(config)# aaa new-model Switch(config)# aaa authentication dot1x default group radius You can verify your settings by entering the show running-config privileged EXEC command. Catalyst 3560 Switch Command Reference 2-3