Cisco WS-C3560E-48PD-SF Command Reference - Page 371

Chapter 2 Catalyst 3560 Switch Cisco IOS Commands set To return to policy-map configuration mode, use the exit command. To return to privileged EXEC mode, use the end command. Examples This example shows how to assign DSCP 10 to all FTP traffic without any policers: Switch(config)# policy-map policy_ftp Switch(config-pmap)# class ftp_class Switch(config-pmap-c)# set dscp 10 Switch(config-pmap)# exit You can verify your settings by entering the show policy-map privileged EXEC command. Related Commands Command class police policy-map show policy-map trust Description Defines a traffic classification match criteria (through the police, set, and trust policy-map class configuration commands) for the specified class-map name. Defines a policer for classified traffic. Creates or modifies a policy map that can be attached to multiple ports to specify a service policy. Displays QoS policy maps. Defines a trust state for traffic classified through the class policy-map configuration command or the class-map global configuration command. 78-16405-05 Catalyst 3560 Switch Command Reference 2-339