Cisco WS-C3560E-48PD-SF Command Reference - Page 797
debug platform forw-tcam
View all Cisco WS-C3560E-48PD-SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 797 highlights
Appendix B Catalyst 3560 Switch Debug Commands debug platform forw-tcam debug platform forw-tcam Use the debug platform forw-tcam privileged EXEC command to enable debugging of the forwarding ternary content addressable memory (TCAM) manager. Use the no form of this command to disable debugging. debug platform forw-tcam [adjustment | allocate | audit | error | move | read | write] no debug platform forw-tcam [adjustment | allocate | audit | error | move | read | write] Syntax Description adjustment allocate audit error move read write (Optional) Display TCAM manager adjustment debug messages. (Optional) Display TCAM manager allocation debug messages. (Optional) Display TCAM manager audit messages. (Optional) Display TCAM manager error messages. (Optional) Display TCAM manager move messages. (Optional) Display TCAM manager read messages. (Optional) Display TCAM manager write messages. Defaults Debugging is disabled. Command Modes Privileged EXEC Command History Release 12.1(19)EA1 Modification This command was introduced. Usage Guidelines If you do not specify a keyword, all forwarding TCAM manager debug messages appear. The undebug platform forw-tcam command is the same as the no debug platform forw-tcam command. Related Commands Command show debugging Description Displays information about the types of debugging that are enabled. For syntax information, select Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. 78-16405-05 Catalyst 3560 Switch Command Reference B-37