Cisco WS-C3560E-48PD-SF Command Reference - Page 674
switchport private-vlan
View all Cisco WS-C3560E-48PD-SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 674 highlights
switchport private-vlan Chapter 2 Catalyst 3560 Switch Cisco IOS Commands switchport private-vlan Use the switchport private-vlan interface configuration command to define a private-VLAN association for an isolated or community port or a mapping for a promiscuous port. Use the no form of this command to remove the private-VLAN association or mapping from the port. switchport private-vlan {association {host primary-vlan-id secondary-vlan-id | mapping primary-vlan-id {add | remove} secondary-vlan-list} | host-association primary-vlan-id secondary-vlan-id | mapping primary-vlan-id {add | remove} secondary-vlan-list} no switchport private-vlan {association {host | mapping} | host-association | mapping This command is available only if the switch is running the IP services image, formerly known as the enhanced multilayer image (EMI). Syntax Description association host primary-vlan-id secondary-vlan-id mapping add remove secondary-vlan-list host-association Define a private-VLAN association for a port. Define a private-VLAN association for a community or isolated host port. The VLAN ID of the private-VLAN primary VLAN. The range is from 2 to 1001 and 1006 to 4094. The VLAN ID of the private-VLAN secondary (isolated or community) VLAN. The range is from 2 to 1001 and 1006 to 4094. Define private-VLAN mapping for a promiscuous port. Associate secondary VLANs to the primary VLAN. Clear the association between secondary VLANs and the primary VLAN. One or more secondary (isolated or community) VLANs to be mapped to the primary VLAN. Define a private-VLAN association for a community or isolated host port. Defaults The default is to have no private-VLAN association or mapping configured. Command Modes Interface configuration Command History Release 12.2(20)SE Modification This command was introduced. Usage Guidelines Private-VLAN association or mapping has no effect on the port unless the port has been configured as a private-VLAN host or promiscuous port by using the switchport mode private-vlan {host | promiscuous} interface configuration command. If the port is in private-VLAN host or promiscuous mode but the VLANs do not exist, the command is allowed, but the port is made inactive. 2-642 Catalyst 3560 Switch Command Reference 78-16405-05