Cisco WVC2300 Administration Guide - Page 47
Using the Web-Based Configuration Utility, Using Patrol, Sequence on Audio/Video >
![]() |
UPC - 745883579617
View all Cisco WVC2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Using the Web-Based Configuration Utility Home 7 Icon Description Preset Camera View Select the preset area to patrol. See "Using Patrol Sequence" on page 88 for more information about setting these positions. This icon becomes visible after enabling RS-485. Camera Patrol Move the camera one time through the preset positions. This icon becomes visible after enabling RS485. Move Controls Allows you to incrementally adjust the camera in four (4) directions and back to home. There may be a short delay after a direction is clicked. The Move Control icon becomes visible after enabling RS-485. You also need to connect the camera to an external Pelco D protocol device for the Move Control to work. Resolution Zoom Snapshot Audio On Audio Off Select the desired resolution from the drop-down list. The options are AUTO, 640 x 480, 320 x 240, 160 x 120. The default is AUTO and lets the camera determine the resolution. Click zoom and then drag your mouse to select the section you want to magnify. Click the icon again to increase the zoom to x4 from x2. Click to take a single JPEG picture snapshot of the video image and save it to a desired location on your computer. When the audio is enabled, an icon is displayed on the Home window and audio is picked up through the camera. You can then use the icons to turn the speaker on and off. To enable the sound, see "Audio/Video > Audio" on page 60. Cisco PVC2300 and WVC2300 Internet Video Cameras with Audio Administration Guide 40
![](/manual_guide/products/cisco-wvc2300-administration-guide-a0340fe/47.png)