Cisco WVC2300 Administration Guide - Page 89
Status > System, Status > Image, MPEG-4, MJPEG
UPC - 745883579617
View all Cisco WVC2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Configuring the PVC2300 and WVC2300 Cameras Status > System 8 Status > System The Status > System window displays the camera system status information such as firmware version, IP address, MAC address, date, and time. • Firmware Version-Version of the firmware currently installed. Firmware can be upgraded from the Administration > Firmware window. You must be logged in with administrator privileges to upgrade the firmware. • IP Address-Displays the IP address of the camera. • MAC Address-Displays the MAC address of the camera. • Camera Name-Displays the name of the camera, as defined in the Setup > Basic Setup window. By default, the last six digits of the camera name come from the last three bytes of the MAC address. • Description-Displays the description of the camera, as defined in the Setup > Basic Setup window. • Date/Time-Displays the current date/time configured on the camera. Status > Image The Status > Image window displays MPEG-4 and MJPEG image status. MPEG-4 • Resolution-Displays the image size of the video stream. • Image Quality-Displays the image quality of the video stream. • Frame Rate-Displays the frame rate of the video stream. MJPEG • Resolution-Displays the image size of the video stream. • Image Quality-Displays the image quality of the video stream. • Frame Rate-Displays the frame rate of the video stream. Cisco PVC2300 and WVC2300 Internet Video Cameras with Audio Administration Guide 82