Cisco WVC2300 Administration Guide - Page 65

Configuring the PVC2300 and WVC2300 Cameras Audio/Video > Video 8 Options • Enable Time Stamp-To display a time stamp on the video, enable this feature by checking the check box. • Enable Text Display-To display text on the video, enable this feature by checking the check box. The text can be up to 20 characters in length. This feature is often used to identify the camera location when multiple cameras are installed. • Enable Image Overlay-To display an image on the video, enable this feature by checking the check box. • CIsco Logo-When selected, a Cisco logo will display at the top of the video. Positioning of the logo is determined by the x and y coordinates defined in the Image Position fields. • User Defined Image-Allows you to upload a 24-bit bitmap image file (smaller than 64Kb). • Image Position-The Image Position fields allow you to define the coordinates of the Cisco logo or user defined image. The upper left corner value is 0, 0. Increasing the X value (X: 0 - 639) will move the image to the right. Increasing the Y value (Y: 0 - 479) will move the image down. NOTE Select values within the range of the selected image resolution. • Transparent Color-You can define a color that should appear transparent. This allows a logo or other image to appear over the video without displaying a solid background color. The color value must be entered in RGB hexadecimal color code, such as FFFFFF. Cisco PVC2300 and WVC2300 Internet Video Cameras with Audio Administration Guide 58