Cobra Road Scout Road Scout Manual - Page 11
GPS Filter, Auto Power, Band Settings, Modify, Location Settings, Bluetooth®, Wi-Fi
View all Cobra Road Scout manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Radar Menu GPS Filter Toggles GPS off and on. GPS Filtering enables you to store and lock out, or ignore, fixed location false alerts in Road Scout's memory. Common sources of fixed location false alerts are storefront automatic door openers and motion sensors. To store a false alert location, press MUTE three times during an alert. Subsequent alerts to this signal will be muted and displayed in grey (factory default is on). Note that GPS Filter will not lock out moving false alerts commonly caused by vehicle blind spot monitoring and collision avoidance systems. Auto Power Automatically turns off Road Scout after the set time period. This is especially useful if your vehicle has a constant-on lighter outlet (factory default is 4 Hours). Disabling K band allows you to select K Narrow segments 1-4. K Narrow 1 23.950 - 24.050 GHz K Narrow 2 24.050 - 24.110 GHz K Narrow 3 24.110 - 24.176 GHz K Narrow 4 24.176 - 24.250 GHz Disabling Ka band allows you to select Ka Narrow segments 1-7. Ka Narrow 1 33.400 - 33.700 GHz Ka Narrow 2 33.700 - 33.900 GHz Ka Narrow 3 33.900 - 34.600 GHz Ka Narrow 4 34.600 - 34.800 GHz Ka Narrow 5 34.800 - 35.400 GHz Ka Narrow 6 35.400 - 35.600 GHz Ka Narrow 7 35.600 - 36.000 GHz Band Settings The band settings menu allows you to toggle off and on Radar bands, K and Ka narrow band segments, Laser, and TSR filtering. WARNING: Do not turn off any bands or narrow band segments unless you are absolutely certain there are no traffic radar guns using that specific band or narrow band in your area. To navigate Band Settings, select Modify, then repeatedly press MARK to cycle through all of the band settings. Use the Rotary Dial to turn off and on a band setting. To exit Band Settings, select Exit or simply wait a few seconds. Location Settings The Location Settings menu allows you to toggle off and on each type of location based alert. To navigate Location Settings, select Modify, then repeatedly press MARK to cycle through the location settings. Use the Rotary Dial to turn off and on a location setting. To exit Location Settings, select Exit or simply wait a few seconds. Bluetooth® Turn off and on Bluetooth communication (factory default is on). Wi-Fi Turn off and on Wi-Fi communication (factory default is on). 11